View SY10H841ZH_1129004.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Micrel, Inc.
SINGLE SUPPLY QUAD PECL-TO-TTL W/LATCHED OUTPUT ENABLE
Precision Edge(R) SY10H841 Precision SY100H841 Edge(R)
SY10H841 SY100H841
FEATURES
s s s s Translates positive ECL to TTL (PECL-to-TTL) 300ps pin-to-pin skew 500ps part-to-part skew Differential internal design for increased noise immunity and stable threshold inputs s VBB reference output s s s s Single supply Enable input Latch enable input Extra TTL and ECL power/ground pins to reduce cross-talk/noise s High drive capability: 24mA each output s Fully compatible with industry standard 10K, 100K I/O levels s Available in 16-pin SOIC package Precision Edge(R)
DESCRIPTION
The SY10/100H841 are single supply, low skew translating 1:4 clock drivers. The devices feature a 24mA TTL output stage, with AC performance specified into a 50pF load capacitance. A latch is provided on-chip. When LEN is LOW (or left open, in which case it is pulled low by the internal pulldowns) the latch is transparent. A HIGH on the enable pin (EN) forces all outputs LOW. As frequencies increase to 40MHz and above, precise timing and shaping of clock signals becomes extremely important. The H841 solves several clock distribution problems such as minimizing skew (300ps), maximizing clock fanout (24mA drive), and precise duty cycle control through a proprietary differential internal design. The 10K version is compatible with 10KH ECL logic levels. The 100K version is compatible with 100K levels.
BLOCK DIAGRAM
Q0
PIN NAMES
Pin Function TTL Ground (0V) TTL VCC (+5.0V) ECL VCC (+5.0V) ECL Ground (0V) Signal Input (PECL) VBB Reference Output (PECL) Signal Outputs (TTL) Enable Input (PECL) Latch Enable Input
Q1
GT VT VE
Q2 VBB D D LEN EN DQ
GE D, D VBB
Q3
Q0 - Q3 EN LEN
Precision Edge is a registered trademark of Micrel, Inc. M9999-032906 hbwhelp@micrel.com or (408) 955-1690
Rev.: G Amendment: /0
1
Issue Date: March 2006
Micrel, Inc.
Precision Edge(R) SY10H841 SY100H841
PACKAGE/ORDERING INFORMATION
Ordering Information(1)
LEN EN GE VE D D VBB GT 1 2 3 4 5 6 7 8 SOIC Z16-1 16 15 14 13 12 11 10 9 Q3 GT Q2 VT VT Q1 GT Q0 SY100H841ZH(3) Z16-1 Z16-1 Commercial Commercial Part Number SY10H841ZC SY10H841ZCTR(2) SY100H841ZC SY100H841ZCTR(2) SY10H841ZH(3) SY10H841ZHTR(2, 3) Package Type Z16-1 Z16-1 Z16-1 Z16-1 Z16-1 Z16-1 Operating Range Commercial Commercial Commercial Commercial Commercial Commercial Package Marking SY10H841ZC SY10H841ZC SY100H841ZC SY100H841ZC SY10H841ZH with Pb-Free bar-line indicator SY10H841ZH with Pb-Free bar-line indicator SY100H841ZH with Pb-Free bar-line indicator SY100H841ZH with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free
16-Pin SOIC (Z16-1)
SY100H841ZHTR(2, 3)
Notes:
1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs.
M9999-032906 hbwhelp@micrel.com or (408) 955-1690
2
Micrel, Inc.
Precision Edge(R) SY10H841 SY100H841
TRUTH TABLE
D L H X X LEN L L X H EN L L H L Q L H L Latch
PIN DESCRIPTION
Pin 1 2 3 4 5 Symbol LEN EN GE VE D D VBB GT Q0 GT Q1 VT VT Q2 GT Q3 Description Latch Enable Input Enable Input (PECL) ECL Ground (0V) ECL VCC (+5.0V) ECL Signal Input (Non-inverting) ECL Signal Input (Inverting) VBB Reference Output (PECL) TTL Ground (0V) Signal Output (TTL) TTL Ground (0V) Signal Output (TTL) TTL VCC (+5.0V) TTL VCC (+5.0V) Signal Output (TTL) TTL Ground (0V) Signal Output (TTL)
ABSOLUTE MAXIMUM RATINGS(1)
Symbol VE (ECL) VT (TTL) VI (ECL) VOUT (TTL) TLEAD Tstore TA Rating Power Supply Voltage Input Voltage Lead Temperature Range (soldering, 20sec) Storage Temperature Operating Temperature Value -0.5 to +7.0 -0.5 to +7.0 0.0 to VEE 0.0 to VT +260 -65 to +150 0 to +85 Unit V V C C C
6 7 8 9 10 11 12 13 14 15 16
NOTE: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability.
VCC AND CLOAD
Ranges to meet duty cycle requirement: 0C TA 85C. Output duty cycle measured relative to 1.5V.
Symbol PW Parameter Ranges of VCC and CL to meet min. pulse width (HIGH or LOW) at fOUT 40MHz Ranges of VCC and CL to meet min. pulse width (HIGH or LOW) at fOUT 50MHz VCC CL PW VCC CL PW Min. 4.75 10 11 4.875 15 9.0 Typ. 5.0 -- -- 5.0 -- -- Max. 5.25 50 -- 5.125 27 -- Unit V pF ns V pF ns Condition All Outputs
PW
All Outputs
DC CHARACTERISTICS
VT = VE = 5.0V 5%
TA = 0C Symbol IEE ICCH ICCL Parameter Power Supply Current Power Supply Current ECL TTL Min. -- -- -- Max. 40 20 25 TA = +25C Min. -- -- -- Max. 40 20 25 TA = +85C Min. -- -- -- Max. 40 20 25 Unit mA mA Condition VE Pin Total all VT pins
M9999-032906 hbwhelp@micrel.com or (408) 955-1690
3
Micrel, Inc.
Precision Edge(R) SY10H841 SY100H841
TTL DC ELECTRICAL CHARACTERISTICS
VT = VE = +5.0V 5%
TA = 0C Symbol VOH VOL IOS Parameter Output HIGH Voltage Output LOW Voltage Output Short Circuit Current Min. 2.5 2.0 -- -80 Max. -- -- 0.5 -200 TA = +25C Min. 2.5 2.0 -- -80 Max. -- -- 0.5 -200 TA = +85C Min. 2.5 2.0 -- -80 Max. -- -- 0.5 -200 Unit V V mA Condition IOH = -3.0mA IOH = -15mA IOL = 24mA VOUT = 0V
10H ECL DC ELECTRICAL CHARACTERISTICS(1)
VT = VE = +5.0V 5%
TA = 0C Symbol IIH IIL VIH VIL VBB Parameter Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage Output Reference Voltage Min. -- 0.5 3.830 3.050 3.620 Max. 225 -- 4.160 3.520 3.730 TA = +25C Min. -- 0.5 3.870 3.050 3.650 Max. 175 -- 4.190 3.520 3.750 TA = +85C Min. -- 0.5 3.940 3.050 3.690 Max. 175 -- 4.280 3.555 3.810 Unit A A V V V Condition -- -- VE = 5.0V VE = 5.0V VE = 5.0V
Note: 1. ECL VIH, VIL and VBB are referenced to VCCE and will vary 1:1 with the power supply. The levels shown are for IVT = IVO = VCCE = +5.0V.
100H ECL DC ELECTRICALCHARACTERISTICS(1)
VT = VE = +5.0V 5%
TA = 0C Symbol IIH IIL VIH VIL VBB Parameter Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage Output Reference Voltage Min. -- 0.5 3.835 3.190 3.620 Max. 225 -- 4.120 3.525 3.740 TA = +25C Min. -- 0.5 3.835 3.190 3.620 Max. 175 -- 4.120 3.525 3.740 TA = +85C Min. -- 0.5 3.835 3.190 3.620 Max. 175 -- 4.120 3.525 3.740 Unit A A V V V Condition -- -- VE = 5.0V VE = 5.0V VE = 5.0V
Note: 1. ECL VIH, VIL and VBB are referenced to VCCE and will vary 1:1 with the power supply. The levels shown are for IVT = IVO = VCCE = +5.0V.
M9999-032906 hbwhelp@micrel.com or (408) 955-1690
4
Micrel, Inc.
Precision Edge(R) SY10H841 SY100H841
AC CHARACTERISTICS
VT = VE = 5.0V 5%
TA = 0C Symbol tPLH tPHL tskpp tskew++ tskew- - tPLH tPHL tPLH tPHL tr tf fMAX -- -- tS tH Parameter Propagation Delay D to Output Part-to-Part Skew(1,4) Within-Device Skew(2,4) Within-Device Skew(3,4) Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Q0-Q3 Min. 2.7 -- -- -- 2.7 2.7 -- 160 1.5 1.0 0.75 0.75 Max. 3.7 0.5 0.3 0.3 3.7 3.7 1.5 -- -- -- -- -- TA = +25C Min. 2.7 -- -- -- 2.7 2.7 -- 160 1.5 1.0 0.75 0.75 Max. 3.7 0.5 0.3 0.3 3.7 3.7 1.5 -- -- -- -- -- TA = +85C Min. 2.7 -- -- -- 2.7 2.7 -- 160 1.5 1.0 0.75 0.75 Max. 3.7 0.5 0.3 0.3 3.7 3.7 1.5 -- -- -- -- -- Unit ns ns ns ns ns ns ns MHz ns ns ns ns Condition CL = 50pF CL = 50pF CL = 50pF CL = 50pF CL = 50pF CL = 50pF CL = 50pF CL = 50pF -- -- -- --
Propagation Delay LEN to Q Propagation Delay EN to Output Output Rise/Fall Time 1.0V to 2.0V Max. Input Frequency(5,6) Pulse Width Recovery Time EN Set-up Time D, EN Hold Time D, EN
Notes: 1. Device-to-Device Skew considering HIGH-to-HIGH transitions at common VCC level. 2. Within-Device Skew considering HIGH-to-HIGH transitions at common VCC level. 3. Within-Device Skew considering LOW-to-LOW transitions at common VCC level. 4. All skew parameters are guaranteed but not tested. 5. Frequency at which output levels will meet at 0.8V to 2.0V minimum swing. 6. The fMAX value is specified as the minimum guaranteed maximum frequency. Actual operational maximum frequency may be greater.
M9999-032906 hbwhelp@micrel.com or (408) 955-1690
5
Micrel, Inc.
Precision Edge(R) SY10H841 SY100H841
TTL SWITCHING CIRCUIT
VEE USE 0.1F CAPACITORS FOR DECOUPLING. PECL 50 COAX PULSE GENERATOR IN DEVICE UNDER TEST TTL OUT 450 VCC & VCCO
50 COAX
50 COAX
USE OSCILLOSCOPE INTERNAL 50 LOAD FOR TERMINATION.
CH A OSCILLOSCOPE
CH B
ECL/TTL PROPAGATION DELAY -- SINGLE ENDED
50% VIN Tpd++ 1.5V VOUT Tpd- -
ECL/TTL WAVEFORMS: RISE AND FALL TIMES
2.0V VOUT Trise Tfall 0.8V
M9999-032906 hbwhelp@micrel.com or (408) 955-1690
6
Micrel, Inc.
Precision Edge(R) SY10H841 SY100H841
16-PIN SOIC .300" WIDE (Z16-1)
Rev. 03
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131
TEL
USA
+ 1 (408) 944-0800
FAX
+ 1 (408) 474-1000
WEB
http://www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-032906 hbwhelp@micrel.com or (408) 955-1690
7

▲Up To Search▲

Price & Availability of SY10H841ZH

	To Download SY10H841ZH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .